Armstrong Clark Oil Based Wood Deck Stains

Armstrong Clark Prepping Instructions

by Administrator

The most crucial step in any exterior wood restoration or maintenance project is to properly prep the surface before staining. Armstrong Clark Wood Stains are quality-formulated wood coatings with five generations’ worth of experience that will give your deck lasting beauty and protection.

To ensure the expected results from any of the Armstrong Clark Oil-Based Wood Stain products, the wood surface must be cleaned and prepped prior to staining.

The exterior wood surface being refinished needs to be free of dirt, grime, gray wood fibers, and old deck stain or sealer. Even new wood needs to be cleaned to remove mill glaze and contaminants. For newer or grayed-out wood, we highly recommend using Restore-A-Deck Wood Cleaner and Brightener. This two-step powder system is specially designed to clean and prepare wood for new stain.

Armstrong Clark Prepping Instructions

For wood surfaces with old deck stains or sealers, we recommend the Restore-A-Deck Stain Stripper. This product is designed to break down and soften transparent and semi-transparent wood stains so they can be washed away.

This process of cleaning or stripping the wood will ensure that the Armstrong Clark Wood Stain will penetrate the wood and perform properly. Use the simple-to-follow step-by-step instructions for either RAD product to adequately prep the wood surface.

Applying a new coat of Armstrong Clark Stain (maintenance coat) over an old coat is easy. However, prior to applying a maintenance coat of any Armstrong Clark Stain, it is still important to clean the wood surface. It is not necessary, however, to remove the old Armstrong Clark stain. Simply clean the surface using the RAD Wood Cleaner, and any old Armstrong Clark stain that remains will bond with the new stain coat.

Step two of the system follows either the RAD Cleaner or RAD Stain Stripper. The RAD step two is a Wood Brightener that counteracts the causticity of the cleaner or stripper and corrects the wood’s pH level, making it more acidic. This opens the wood’s pores and allows it to accept as much new stain as possible.

Once the exterior wood surface is ready, following the prepping instructions, allow 1-2 days for the wood surface to dry. You can expect the most from your new Armstrong Clark Oil-Based Wood Stain with proper prepping. It will enhance the wood’s beauty and give you extended use for many years.

Ask Below for Questions on Prepping for Armstrong Clark Stains

Subscribe
Notify of
guest
702 Comments
Inline Feedbacks
View all comments
larry
larry
9 years ago

Can I use this product for cedar shakes roof.

Avatar photo
10 years ago

[quote name=”opwdecks”][quote name=”anand.a.deshpande”]Hi,
Yesterday we applied a semi-solid stain to our house (exterior). The tone is too dark. I tried with sample earlier which were semi-transperant . We used (80% red-wood 20% cedar) together. Is there a way to tone the shade down?[/quote]
Sorry but you cannot lighten or tone down a color. You can remove it and start over.[/quote]

If I have to remove the stain which is very fresh will i have to use only power wash u recommend Stripper and then Wash

Avatar photo
10 years ago

Hi,
Yesterday we applied a semi-solid stain to our house (exterior). The tone is too dark. I tried with sample earlier which were semi-transperant . We used (80% red-wood 20% cedar) together. Is there a way to tone the shade down?

Avatar photo
Admin
10 years ago

[quote name=”sheryl baldwin”]We have sanded our deck taking the top layer off to smooth out the boards and get down to a healthier layer on the redwood prior to applying the semi-transparent. Do we still need to do any of the cleaner or brightener steps above?[/quote]
Yes you should.

sheryl baldwin
sheryl baldwin
10 years ago

We have sanded our deck taking the top layer off to smooth out the boards and get down to a healthier layer on the redwood prior to applying the semi-transparent. Do we still need to do any of the cleaner or brightener steps above?

william krejci
william krejci
10 years ago

I have a cedar deck that is approx. 6 months old. What should i do in prepping it for staining. Thanks!

Gordon
Gordon
10 years ago

How long can the can of semi transparent stain sit around before it needs to be reshaken/mixed?
G

John Eisenbeil
John Eisenbeil
10 years ago

On a 25 year old deck with apparent moderate re-staining, 2 deck boards required replacing due decayed knot areas. The remainder are solid though weathered and cracked a little in spots. Is there a way to prepare the 2 new boards for staining so as the colors match somewhat, realizing the newer wood will absorb stain much differently than the old? I expect additional coats would create shiny spots.

Andreas Kanon
Andreas Kanon
10 years ago

What is your recommendation to prepare a new Redwood deck before staining it?

Chris Miller
Chris Miller
10 years ago

No, the wood is not rough sawn. It is brand new Western Red Cedar though. I wonder if I need to clean it and restore with Restore a Deck product or something else?

Chris Miller
Chris Miller
10 years ago

Hi,

I just bought 5 gallons of the semi transpartent Cedar staing from AC. I have a brand Western Red cedar fence installed a week ago. How long to I have to wait to stain it with AC?

philip racicot
philip racicot
10 years ago

I have a mahogany wood on my front porch that has been previously coated with a polyurethane/marine varnish coating what do I have to do to prepare this wood to use Armstrong Clark mahogany wood stain

Kristy
Kristy
10 years ago

After you use the brightener, and wood pores are open what is the maximum time you can wait to stain the deck? If I can’t get to it in 1-2 days?

Connie Lambert
Connie Lambert
10 years ago

When prepping a deck with worn out semi transparent stain that will need stripping do I use the deck wash then the stripper and brightener or strip and brighten and then wash or skip the wash altogether if I’m stripping and brightening? Confused

Peter Reed
Peter Reed
10 years ago

Our new cedar deck has aged 3 months (southwest exposure, Bay Area). To test readiness yesterday I stained a leftover piece of decking. It soaked in and dried within 30-60 minutes, so I’m ready. Will the RAD cleaner and stripper remove construction marks and marks made from use of deck over past 3 months?

P.S. Stained piece of test wood looks great! Thanks!!

Avatar photo
10 years ago

I may have missed this but your tips talk of cleaning and brightening but do not mention sanding.

I have a cedar deck and have stripped off an old solid stain. Should I sand and then clean and brighten or the opposite order?

Also, is it possible to clean and brighten too much? I just ordered your RAD kit but have previously cleaned with a Behr product and am not impressed with the result, the surface is blotchy, s so am thinking to clean again.

mikey
mikey
10 years ago

I have a pressure treated deck that is 5 years old and I used Thompson’s water seal on it. I now want to stain it a dark brown color to match my siding. I used Behr products to remove the water seal, both the stripper and the brightener. Do I have to do anything else before I can use your stain. Thank you, Mike

kathie
kathie
10 years ago

curious…my Behr stain has chipped off after a couple of months…can i just sand the finish completely off…and then use your stain…i have available messmer’s wood and deck cleaner as well as their brightener. however i am thinking i should use that after using your product when i want to maintain the deck down the line. I am thinking that your product will not make it so i will need to sand my deck again and that i will just maintain it by cleaning it and adding another coat of your product..is this correct?

Marty Zei
Marty Zei
10 years ago

installed pressure treated pine decking. how long before staining??

thanks

George
George
10 years ago

I have almost the same situation as the last poster. I will be reapplying your cedar stain over my fence which was last stained with your cedar stain 5 years ago. Some of the areas which I can’t seem to get the stain off are a light cedar/tan color after cleaning the fence. Upon application of your cedar stain will the areas that cannot be cleaned off appear to be darker or blotchy or will they tend to blend in?

ken morin
ken morin
10 years ago

Have applied a semi- transparent sample stain to an area of about 4×4. Should I use your stain stripper on it before applying one of your semi-transparent stains on the deck?

Avatar photo
10 years ago

I’m in the process of re-staining my pressure treated deck. I’ve applied the RAD stripper, used a pressure washer to remove the old stain and used the brightener. However, I could not completely remove all of the old stain. How critical is it to remove 100% of the old stain? The old stain is SW Deckscapes oil based stain. The color I plan on using is similar, but different enough. I’m worried that the old stain may show through it some areas. After doing the 2-step prep process, the deck absorbs water even where there is some old stain. Do I still need to sand off the old remaining stain? If so, what method do you recommend for sanding?

Thanks

Mark
Mark
10 years ago

I just finished staining my new redwood deck with A/C transparent redwood stain by mistake. I meant to use A/C semi-sierra redwood. It gets a lot of sun and faces West. What is the best option for re-staining? Can I apply the Sierra semi-redwood over the existing transparent redwood, or should I strip the transparent redwood and start over with the semi-sierra redwood? Alternatively, I could wait 12 months when it is time to reapply and start over. Any help is greatly appreciated.

Ed Schinnerer
Ed Schinnerer
10 years ago

What would be the proper preparation for new cedar decking boards that are to be stained on all sides before installation?

Bob
Bob
10 years ago

I stained my Ipe deck 2 years ago with a different product. The stain has faded but is not completely gone. I used the Restore-A-Deck kit prior to the first staining 2 years ago. I would like to use the Armstrong product but don’t know if I can just use the RAD cleaner product I used the last time or if I have to strip it with the RAD stripping product. If I do need to strip it, after I use the Brightener, do I also need to use the RAD cleaner and brightener?

g
g
10 years ago

I stained my cedar fence 4 years ago and some parts are grey whereas other parts still look good. Based on this information which one of the cleaners/strippers would you suggest.

Dan Laurent
Dan Laurent
10 years ago

I have a new Ipe deck, built last fall. It was treated with Ipe Oil in late September, with the plan to re-apply a stain in the Springtime. The color is nice, but disappointingly “flat”. I know these stains are not shiney, like Sikkens stuff, but I expected a bit more natural wood grain visible. I am thinking of switching to Armstrong Clark stain, either in Amber or mahogany. I really don’t want to darken the wood, just show it’s natural rich Ipe hues.

Could you advise on which of your 2 colors would be preferable, and also how best to prep the wood after the Ipe oil treatment to best show the AC stain. I also plan to order samples of the 2 AC stains.

Many Thanks!

1 2 3 8
702
0
Would love your thoughts, please comment.x